Electroplating Rectifiers - Exporter, Manufacturer & Supplier, Vadodara, India
POWER ENGINEERING CORPORATION
Electroplating Rectifiers
To inquire, Select Product/s & Click on
Product Code :
03
[Select]
Product Specification
Power Rectifiers are designed for 3 phase 50 Hz. AC input supply & are available for operations at any voltage between 380 and 440 volts, in India but can be designed for 60 Hz AC and any other voltage available. It is recommended that the input to the rectifier should be connected through a proper protective device, to provide positive protection to personal and the system, in the event of maintenance or in case a fault occurs. 1) In plating application the regulator is better & technology is adopted in Germany and Europe because of as explained in advantage. 2) Other manufactures of rectifiers have shifted to thyristors because they do not have the technology of rolling carbon roller regulators. 3) Manufactures of rectifiers claim that thyristor controlled rectifier has less losses than regulator. They compare thyristor with sliding carbon type regulator. In our case their claim is not true. We use vertical coil type rolling carbon regulator. The copper section is three times so the losses are almost 1/6 or 20%. 4) In our regulator the roller mover on both sides of the coil to give ± 440 V or ± 254 V output. We design the rectifier in 'Q' connection in which the regulator current is half the line current so losses are less and life is much more.
Other Products
Electroplating Rectifiers
<< Back
Contact Details
POWER ENGINEERING CORPORATION
967/2/2, GIDC Industrial Estate, Opposite ERDA, Makarpur,Vadodara - 390010, Gujarat, India
Phone:
91-265-6671713
Fax:
91-265-6671713
Accepts only domestic inquiries
Send Mail
Key Personnel
Mr. Khosla
Mobile:
+919898019713,+919426019713,+919898139813
Home Page
Company Profile
Showroom
Transformers
Voltage Stabilizers
Rectifiers
Copyright © 2006
tradeindia.com
. All Rights Reserved.
Designed & Developed by
